FIVE HUNDRED (500) - 48 MM Ø INDUCTION LINER DISCS WITH TABS FOR INDUCTION SEALING APPLICATIONS
Induction sealers seal caps equipped with induction liner disks to the top (bunghole) of most non-metallic containers. This lining consists of four layers of material, including one metallic layer over a thermoplastic layer. When the capped container is positioned next to an active induction head, one or more induction coils excite the metallic molecules of the metallic layer. This ultrahigh frequency vibration causes the metal layer to heat up, which in turn melts the thermoplastic layer of the lining causing it to fuse to the top of the container. This seal is hermetic and impermeable to gases. In effect the lining becomes part of the container. From this point on nothing enters or exits the container until the lining is punctured. For this reason induction sealers are used widely thought many industries. The process is extremely simple, and can be accurately repeated time after time.
Description of item:
This order consists of Five Hundred (500) Induction Disks. MADE IN THE U.S.A. Each Disk is a one piece peelable induction heat seal for PET & PVC containers, backed by a polyester laminated polymer foam. Made in accordance with Good Manufacturing Practices, complies with applicable FDA regulations (21 CFR 177.1210) for most food, beverage and pharmaceutical products.
- Disc Diameter: 48mm (1.89in.)
- Disc Type: 3 Tab Design
- Compatibility: Compatible with Polyethylene Terephthalate(PET) & Polyvinyl Chloride (PVC) containers
- Model Number C-IL-1P-48-PET
- Storage: Our induction liners are stored away from sunlight at temperatures between 60 -85 Deg F (15-30 Deg C) at 30 – 70% humidity.
- Typical Applications: Food, Pharmaceuticals, Neutraceuticals, Cosmetics and general applications.
- Compatible with all JORESTECH® Induction Sealing Machines
- MADE IN THE U.S.A.
Advantages of Using Induction Sealer Systems:
- Tamper Resistance
- Protection from the Elements and Airborne Pollutants
- Keeps Humidity Levels Stable
- Product Freshness
- No Product Leakage
- Extended Shelf Life
- Improved Product Perception & Excellent Appearance
- Seals Product Aroma
- Seals in Flavors
- Keeps Out Odors
- Tamper Evident
We offer a wide variety of liners in many types and sizes, for all uses. Please contact us with your particular requirement.
As with all liner sealing materials, this product should be tested thoroughly under end-use conditions to ensure it meets the requirements of the specific application. Testing services are complimentary.
If you do not have an induction machine: We recommend testing your cap and container with the induction liner before purchase. Small variations in cap characteristics may not allow the liner to function properly. If interested send a minimum of 12 containers and caps to the address below. Write "Product Samples" on the shipping label. Include your contact information and specify the type of product that you will be packaging. Evaluation will be performed under our own test conditions. Results may differ under end-use conditions.
Disclaimer: All orders are packaged as they are received.
Purchases over 500 units will be bundled together unless otherwise specified.
Please contact us for special packaging requests.