Tabletop Volumetric Cream / Paste Piston Filler - 50 ml - High Viscosity - (Model FP-50--D) by JORESTECH®

 
$2,140.00
30 days
E-FP-50-D
In stock
+

Bench Top Volumetric Thick Liquid Piston Filler with Hopper - Model FP-50-D by JORESTECH®

Piston Fillers measure and dispense free flowing products - such as thin and/or moderately dense liquids - onto a container. Each machine is equipped with one volumetric piston. Each fill/release cycle consists of an intake stroke, where the product is withdrawn from the container or hopper and taken into the product cylinder. The down stroke commences as soon as the product cylinder has reached its predetermined fill level. The piston pushes the product out of the cylinder and into the container.
The amount of product to dispense is set by a simple adjustment of the length of the piston stroke (the distance covered by the piston). The adjustment is performed by turning an small adjusting wheel located at table-top level. If the stroke is reduced the volume of dispensed product decreases. On the other hand, lengthening the piston stroke will result more product being dispensed. Once the machine is set, the piston filler will dispense accurately and repeatedly. Two repeated cycles can be performed to fill volumes that are higher than the cylinder capacity.
Our Volumetric Piston Fillers are used by industries in the Food & Beverage, Cosmetics, Personal Care, Agricultural, Animal Care, Pharmaceutical, and Chemical fields.


Features:

  • Filling Range: 0.34- 1.70 Oz. (10 - 50 ml)
  • Approximate Speed: 20 - 25 pcs/min(depending on operator speed, product density, draw length, a fill speed, among others)
  • Suitable to fill low to high-density liquids (1,000 - 10,000 cp)
  • All Parts in Contact with Product are Food Grade (SS 316)
  • Stainless Steel Construction
  • Rugged Rotary Valve System Design
  • Electro-pneumatic operation
  • Fluoropolymer elastomer O-ring System
  • Adjustable Volumetric Piston System with Numeric Reference Display
  • Max temperature of the liquid: 176F (80C) Optional tooling available for up to 203F (95C)
  • Piston Feed Speed Adjustment
  • No-drip Option Included and Installed
  • Extremely Accurate (+/- 1%)
  • Extremely Easy to Clean and Maintain
  • Sanitary Stainless Steel Quick Disconnect Fittings
  • Extremely Easy to OperateQuick Connect/Disconnect Pneumatic Fittings.

Control Panel:

  • Master Start/Stop
  • Cycle Reset Button
  • Semi Auto/Continuous Operation Selector Switch
  • Air Pressure Gauge
  • Air Intake Pressure AdjustmentPiston Volume Adjust with Numeric Display

Other Specifications:

  • Includes Electro-mechanic Industrial Duty Pedal
  • Includes Parts kit
  • Voltage: 110v / 50-60 Hz / 1Ph
  • Not to be Used to Dispense Flammable or Explosive Products
  • Nozzle Type: Type A
  • Machine Size: 39 inches x 11 inches x 23 inches
  • Stock Nozzle Tip dimensions: 8mm Outside Diameter x 6mm Inside Diameter x 11mm Length (0.31in OD x 0.23in ID x 0.43in L)
  • Air Requirements: 4 CFM/min (114 lts/min) @ 90 PSI (6.2 Bar) (Air compressor not included) (Min. Req. Air Compressor: 25 Gal)


Shipping Specifications:

  • Boxed Machine Size: 50 inches (1270mm) x 40 inches (457mm) x 21 inches (432mm)
  • Boxed Machine Weight: 115 lbs (53 kgs)


Other Options (not included with the machine – inquire for availability):

  • Custom Nozzles (To direct flow and/or to prevent foaming, splashing, excessive aeration, etc.)
  • Various O-Ring Materials (PTFE, Silicon, Floroelastomers, Encapsulated Silicon, etc.)


Other products from our extensive product line (not included with the machine - inquire for availability):

  • Conveyors, Marmites, Mixers, Positioners, Filler, Labelers, Coders, Sealers, Cappers, Bundlers, Wrappers, and many others.
  • Manual, Semi-Automatic, and Fully Automatic Systems
  • Partial and Complete Filling Lines


35 inches x 12 inches x 26 inches

We frequently test customer's products and applications. Please contact us to evaluate your application and to learn about our simple testing parameters, or follow the link "Send Samples" located at the bottom right corner of this page. Due to the variety of solutions we test at any given time, we ask that you kindly refrain from sending product until we discuss our testing process.

Machine characteristics may change without notice


Version 04-05-2017


Click Here for Spare Parts

Warranty Information

Return/Warranty Policy :
Return Days/Warranty Months: 30/6

Piston Fillers

Filling Range:
  • 0.34 - 1.70 Oz.
Suitable to Fill: :
Low to High Density Liquids (0 - 10,000 cp)

Machine Dimensions

Item Width:
39 Inches
Item Length:
40 Inches
Item Height:
23 Inches

Shipping Dimensions

Shipping Width:
50 Inches
Shipping Length:
40 Inches
Shipping Height:
21 Inches

Other Specifications

Item Condition:
New
Manufacturer:
JORESTECH®
Material:
  • Stainless Steel

Industry Information

Related Industries:
  • Agricultural Fishing & Hunting
  • Food & Beverage
  • Chemical Manufacturing
  • Health & Personal Care
  • Pharmaceutical & Nutraceutical

ozzle Types and Nozzle Parts Breakdown Manual (Nozzle_Types_&_Parts__Breakdwon_Manual.pdf, 615 Kb) [Download]

No posts found

Write a review

Hopper size for each model

Model Φ L A D Capacity
FP-50D 300 350 150 1.25〃(50.5mm) 3.7gal 14L
FP-100D 300 350 150 1.25〃(50.5mm) 3.7gal 14L
FP-250D 350 410 150 2〃(64mm) 5.55gal 21L
FP-500D 400 430 190 2.5〃(77.5mm) 7.92gal 30L
FP-1000D 400 510 190 3〃(91mm) 9.25gal 35L
FP-5000D 500 600 260 5〃(145mm) 15.85gal 60L
FP-1000D2 500 610 260 3〃(91mm) 15.85gal 60L

Product dimensions and weights are approximate and may change without prior notice.